Author Archives: ecercom

  • 0

Alloy LDX 2101 Super Duplex Stainless Steel Mesh/Screen

Category : Uncategorized

Alloy LDX 2101  Super Duplex Stainless Steel Mesh/Screen

Alloy LDX 2101 Super Duplex Stainless Steel
Alloy LDX 2101 is a low-nickel, nitrogen enhanced lean duplex stainless steel developed for general-purpose use. The austenitic-ferritic (duplex) structure of the alloy is balanced to approximately equal amounts of ferrite and austenite in the solution-annealed condition.
Alloy LDX 2101 possesses both superior strength and greater chloride stress-corrosion cracking resistance than conventional 300 series stainless steels.
The corrosion resistance of LDX 2101 is generally good making it suitable for use in a wide variety of applications. In most environments, it is superior to 304L stainless steel and comparable to the molybdenum containing 316L stainless steel.
Mesh: 0.5-250 mesh/InchThickness: Min0.05mm

Corrosion Resistance

The 300 series stainless steels are used extensively in numerous process industries due to their overall general corrosion resistance. The corrosion resistance of LDX 2101 is generally better than 304L and comparable to 316L making it suitable for use in a wide variety of industries and applications.
Chemical Analysis
Typical Values (Weight %)
Cr Ni Mn Mo N
21.0 min. –
22.0 max.
1.35 min. –
1.70 max.
4.00 min. –
6.00 max.
0.10 min. –
0.80 max.
0.20 min. –
0.25 max.
Physical Properties
Temperature, ºF
68 200 400 600
Density lb/in3 0.28
Modules of Elasticity x 106 psi 29 28 27 26
Poissons Ratio 0.3
Linear Expansion x 10-6 in/in/°F 7.2 7.5 7.5
Thermal Conductivity Btu/ft/h °F 8.7 9.3 9.8 10.4
Thermal Capacity J/kg °F 500 530 560 590
Electric Resistivity micro-ohms•meter 0.80 0.85 0.90 1.00
Mechanical Properties
Minimum values
(.625″ Plate)
Typical values
(.625″ Plate)
0.2% Yield Strength ksi 65 69
Tensile Strength ksi 94 101
Elongation % 30 38
Hardness (Brinell) HB 290 (max) 225
Air Pollution Control
External absorber and outlet duct reinforcements
Biodiesel and Ethanol plants and tanks
Chemical Process Equipment
Pressure vessels, heat exchangers, tanks, piping systems and tankers
Food and Beverage Process Equipment
Palm oil and wine storage tanks
Bridges, flood gates, sluice gates
Pulp and Paper
Hydrogen peroxide bleaching reactors, white liquor storage tanks, digesters,
washers, paper machine parts
Seawater Treatment
Desalination system chambers and evaporators
Water and Wastewater Treatment

  • 0

321 Stainless Steel Plate Hot Rolled / Cold Rolled For Chemical Industry

Category : Uncategorized

321 Stainless Steel Plate Hot Rolled / Cold Rolled For Chemical Industry

Quick Detail

321 stainless steel plate

size: 1500 x 3000mm 1500 x 6000mm thickness: 3.0mm – 120mm

surface: NO.1 2B BA NO.4 HL 8K PVC coated
321 stainless steel plate

products 321 stainless steel plate Brand
size 1500x3000mm

Or as required

surface original: NO.1

traetment: NO.4 mirror

thickness 3.0-120mm Certificate SGS, BV


Article 321 stainless steel plate
Specification 1m 1.219m 1.5m or as your requirement
Surface 2B NO.1 BA Hairline 4K 6K 8K No.3 No.4
Type Sheet/Plate
Thickness 0.5-30mm
Brand TISCO JISCO LISCO and so on
Application Foodstuff,gas,biology,metallurgy,electron,chemical,petroleum,boiler,nuclear energy,equipment fertilizeretc and so on
Parking interlayer paper kraft paper wooden packing or as your requirement
Payment 30% TT in advance, 70% balance against BL copy or LC at sight
container size 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High)
Delivery Time 15 days after received the deposit of T/T or L/C
Note We can produce other standard as the customers’s requirement

we are the agent of BAOSTEEL in wuxi city, we can supply all size of stainless steel plate, the common size of our plate is 1500x6000mm, we can also produce un-standard size plate as customer required. the thickness is from 3.0-120mm. we have about 5000 tons in stock. the produce date of us is very short.

Applied to the grain boundary corrosion resistant requirements of high chemical industry, coal, oil field open machine, have difficulty in building materials heat-resistant parts and heat treatment of parts

1. The oil gas combustion tube

2. The engine exhaust pipes

3. The shell of the boiler, heat exchanger, heating furnace parts

4. Deadened the noise of diesel engine parts

5. The boiler pressure vessel

6. Chemical transporter

7. Expansion joint

8. Burning furnace pipe and dryers with spiral welded pipe
BAOSTEEL grade 321 stainless steel plate, hot rolled 321 SS plate
Chemical Compostion

C Si Mn P S Cr Ni Mo Ti
0.08 <=1.00 <=2.00 <=0.035 <=0.03 17.00-19.00 9.0-12.0 2.0-3.0 ≥5×C%

Mechanical properties

Tensile strength of sigma b (MPa) : p. 520
Conditions to yield strength sigma (0.2 MPa) : p. 205
Elongation delta (%) : 40 or higher
Reduction of area bits (%) : 50 or more
Hardness: 187 hb or less; 90 HRB or less; 200 hv or less

Density(g/cm3) : 7.98

  • 0

Stainless steel trolley(handcart) with swivel brake casters for restaurant,Industril,or Medical Field

Category : Uncategorized

 Stainless steel trolley(handcart) with swivel brake casters for restaurant,Industril,or Medical Field


1: Standard materials stainless steel
2: All benchs can customized.
3: All benchs come in knock down packaging for ease of transportation and storage.
4: Adjustable bullet feet.
5: Well polished, no sharp corner, good workmanship.
6: Round Feet.
Note: We have two type bench series:
1: We used socket connect the leg and the under shelve.
2: We used Screw connect the leg and the under shelve.
Our standard use Screw connect the leg and the under shelve.
Item Kitchen Stainless Steel Working Table
Size(mm) 1200*600*850 (can be produced as customers’size)
Packing size(mm) 1220*620*100
Material Stainless Steel
Number of Deck 2
MOQ 1 piece is also welcomed, our competitive price is based on your order quantity.
Packing Carton Package, Wooden Package
Payment Term T/T, L/C
Delivery Time 15 days after receiving the deposit
Shipment By Sea, By Air, or via DHL, UPS, TNT, FedEx, EMS etc.
(We’l l choose the most suitable way and lowest delivery cost for you. )
Warranty Time 1 years
Customer Service Lifetime technical support and accessories supply.

  • 0

5.5mm 6.5mm 12mm Stainless Steel Wire Rod For Making Bed Spring Wire

Category : Uncategorized

5.5mm 6.5mm 12mm Stainless Steel Wire Rod For Making Bed Spring Wire





Stainless steel wires are available in various sizes ranging from hair thin 0.05mm dia to 6.00mm Dia

stainless steel wire
1. Manufactur supply directly
2. competitive price.
4. OEM service available.
stainless steel wire
1) stainless steel wire from dia.0.1mm to 16mm(0.004”-0.630”)

2) grade: 300 series,200 series,400series

3) item: EPQ wire,weaving ,braiding wire,cold heding wire,spring wire,redrawing ,annealing wire,shaped eire,welding wire,CD bar,CG bar.

4) Electro polishing quality wire, weaving wire,braiding wire,Cold heading wire,spring wire,Redrawing wire,annealing wire ,shaped wire,welding wire,CD bar,CG bar




1. Name: steel wire rod

2. Diameter:5.5-12.0mm

3. Material: Q195,Q235


5. Use for making Bed spring wire, Spring steel wire, Rope making wire, Tire wire, Spoke wire, High carbon steel wire, Low carbon steel wire, Cold drawn steel wire, Heat drawn steel wire, Free cutting wire, Border wire (may straightening and straight ruler)

Grade Chemical Composition(%)
C Mn Si S P B
SAE1018B 0.15-0.20 0.6~O.90 0.15-0.35 0.060max 0.040 max 0.0008-0.004
Mechanical properties
Tensile strength(N/mm2) Elongation(%)
440-510 ≥30

  • 0

Hexagonal Head stainless steel Bolts and Nuts For Machine , a4 70 bolt DIN933

Category : Uncategorized

Hexagonal Head stainless steel Bolts and Nuts For Machine , a4 70 bolt DIN933


Quick Detail:


Place of Origin:
 China (Mainland)
Brand Name:
Model Number:
a4 70 bolt
stainless steel
a4 70 bolt:
a4 70 bolt



For Machine

Packing: a4 70 bolt 25KG/CTN,36CTNS/PLT
Delivery: 30 days in usual




a4 70 bolt
1.Grade: A2, A4
2.Size: M4-M52

a4 70 bolt

1.Grade: A2, A4

2.Size: M4-M52



5.Material:stainless steel

6.Packing: Standard export packing or According to customer’s requirement

7.Delivery time:30days after order confirmation

Competitive Advantage:
1. We offer you our best price with good quality of the materials.
2. We will deliver the materials strictly according to the the delivery date noted on the contract.
3. We also always have the huge ready stock for sell.
4. We have advanced equipments for the tests
5. We have complete after-sale service to deal with the problems in time.